1. Choose a Base
See Community Silhouettes
Browse what other riders uploaded and load a setup from here.
Build Your Riser
Upload a silhouette, set dimensions, preview, and export.
2. Upload Silhouette
Drop SVG / PNG / DXF / JSON here
Max file size 10MB
JSON restores a saved builder template.
SVG / PNG / DXF custom geometry is not wired into STL export yet.
Sample presets and outer-shape SVG files can be loaded from the deployed folders below.
Loaded: Default silhouette
3. Settings
Units
mm
mm
°
Angle Anchor
Choose which side stays fixed while angle changes.
Hole Pattern
This section is for hole-position data. Download the matching SVG files below if you want to inspect the layout.
Use Case
Community Visibility
Public is the default. Private saves stay only in this browser.
Tip: Increase rear height or angle to reduce wheel bite.
Dimensions
Base
Width
Length
Front
Rear
Angle
Hole Pattern
Silhouette
Need hardware sizing? Use the bolt calculator below for flat or angled risers.
API status: checking...
STL exports the selected base and heights through the live API. The visible hole pattern setting tracks your hole-position data, while custom SVG / PNG / DXF cutouts are still preview-only. You can also drop a saved template JSON into the upload area to restore a setup.
Community Setups
View All Uploads →Private Library
Private saves stay local to this browser and still load back into Build.
Before You Export
Check Hole Spacing
Match your truck bolt pattern before you print a full set.
Confirm Bolt Length
Start with the hardware recommendation in the Dimensions panel, then confirm thread engagement on your deck.
Test Wheel Bite
Increase height or angle if your setup still contacts the deck.
Print & Test Fit
Do a quick fit test before you trust a fresh part on the street.